3-year randomized clinical trial to evaluate the performance of posterior composite restorations lined with ion-releasing materials.

To evaluate the impact of using ion-releasing liners on the 3-year clinical performance of posterior resin composite restorations after selective caries excavation with polymer burs. 20 patients were enrolled in this trial. Each patient had two deep carious lesions, one on each side of the mouth. After selective caries removal using polymer bur (PolyBur P1, Komet, Brasseler GmbH Co. KG, Lemgo, Germany), cavities were lined with bioactive ionic resin composite (Activa Bioactive Base/Liner, Pulpdent, Watertown, MA, USA) or resin-modified glass ionomer liner (Riva Light Cure, SDI, Bayswater, Victoria, Australia). All cavities were then restored with nanofilled resin composite (Filtek Z350XT, 3M Oral Care, St. Paul, MN, USA). All the tested materials were placed according to the manufacturers' instructions. Clinical evaluation was accomplished using World Dental Federation (FDI) criteria at baseline and after 6 months, 1, 2, and 3 years. Data were analyzed using Mann-whitney U and Friedman tests (p < 0.05). The success rates were 100% for all resin composite restorations either lined with ion-releasing resin composite or resin-modified glass ionomer liner. Mann-whitney U test revealed that there were no statistically significant differences between both ion-releasing lining material groups for all criteria during the follow-up periods (p > 0.05). Resin composite restorations showed acceptable clinical performance over 3 years either lined with bioactive ionic or resin-modified glass ionomer liners after selective caries excavation preserving pulp vitality. After the 3-year follow-up period, Activa Bioactive and Riva Light Cure liners were clinically effective and they exhibited with the overlying composite restorations successful clinical performance.Trial registration number: NCT05470959. Date of registration: 22/7/2022. Retrospectively registered.

Introduction of "qpdb" teeth numbering system.

This manuscript introduces a new method for teeth numbering system. The primary rationale of lunching this system was to solve previous numbering systems' drawbacks. Furthermore, to keep simplicity and ease of reading and inputting data. The outcome of a questionnaire disseminated among 66 personnel showed the confusion existing among currently used tooth numbering systems. The 'qpdb' system divided the oral cavity into four quadrants, each quadrant represented by alphabetical English letter (q, p, d & b). In spite of being a promising system, this new system lacks the real usage and application, and need more future studies to prove its validity.

Clinical performance of two ion-releasing bulk-fill composites in class I and class II restorations: A two-year evaluation.

OBJECTIVES: This randomized clinical trial evaluated and compared the 2-year clinical performance of two ion-releasing bulk-fill composites (Cention N and Surefil One) with that of a conventional bulk-fill resin composite (Powerfil) in Class I and II cavities. METHODS: Thirty-two patients, each with 3 Class I and/or Class II cavities under occlusion, were enrolled in this trial. A total of 96 restorations were placed, 32 for each material, as follows: a self-adhesive composite; Surefil-one, alkasite; Cention N, and a bulk-fill resin composite; Powerfil. The restorations were placed by a single operator. Clinical evaluation was performed at baseline (1-week), 6-months, 1-year, and 2-years by two independent examiners using the FDI criteria. Intergroup and intragroup comparisons were analyzed using the Kruskal-Wallis and Friedman Tests. Multiple comparisons between groups were analyzed using the Mann-Whitney and Wilcoxon-rank tests. The level of significance was set at α = 0.05. RESULTS: Twenty-seven patients with a total of 81 restorations were evaluated at the end of the 2-years with 84.35% recall rates. Clinical success rates were 100%, 100%, and 96.3% for Powerfil, Surefil-one, and Cention N, respectively. Cention N showed a statistically significant (p < 0.05) decreased marginal integrity in comparison with resin composite at the 2-year evaluation. No recurrent decay was detected in any restoration. CONCLUSIONS: Both ion-releasing bulk-fill composites provided acceptable clinical performance similar to bulk-fill composite in Class I and II restorations over a 2-year period. CLINICAL RELEVANCE: The results of this trial suggests that there is a promising evidence supporting the use of ion-releasing composites.

Effect of ethanolic extract of propolis on antibacterial and microshear bond strength of glass-ionomer restorations to dentin.

Objectives: This study was conducted to evaluate the effect of ethanolic extract of propolis on antibacterial and microshear bond strength of glass ionomer restorations to dentin. Materials and methods: Conventional glass ionomer cement (Equia forte, GC Tokyo, Japan), resin-modified glass ionomer (Fuji II LC, GC Tokyo, Japan) and propolis powder (dried extract from honey bees) materials were used in this study. Both conventional glass ionomer and resin-modified glass ionomer were modified by two different concentrations of ethanolic extract of propolis (10 % and 25 % EEP). For antibacterial test, Streptococcus mutans strain was spread on agar petri dishes using a sterile swab. Discs of both glass ionomer restorative materials (without adding EEP, with 10 % EEP and with 25 % EEP) were fabricated within the agar plates. Antibacterial activity was evaluated by measuring the inhibition zones around each disc. For microshear bond strength test, 60 healthy human permanent molars were prepared by cutting occlusal surface and expose the dentin at the height of contour of all teeth then conditioned using poly acrylic acid conditioner, both glass ionomer restorative materials (without adding EEP, with 10 % EEP and with 25 % EEP) were mixed and applied on conditioned dentin surface by using tygon tube. Microshear bond strength was evaluated by the universal testing machine. Results: Two-way ANOVA test revealed that both glass ionomer type and different concentrations of EEP had significant effect on the antibacterial test results and microshear bond strength values (p < 0,05). Glass ionomer restorative material with 25%EEP had the highest antibacterial values whereas glass ionomer restorative material without modifications (control groups) had the lowest values. Resin-modified glass ionomer without any modification (control group) had the highest bond strength while resin-modified glass ionomer with 25%EEP had the lowest bond strength. Conclusions: Incorporation of ethanolic extract of propolis to glass ionomer restorative material increases the antibacterial effects of both conventional GIC and RMGI. Inspite of this advantage, it seems that it has deleterious effect on microshear bond strength to dentin.

Attitude towards donation of the excised foreskin after circumcision surgery for research: A study from Madinah, Saudi Arabia.

Studies have shown the possibility of using the part of the foreskin removed after circumcision in the field of scientific and therapeutic research. Donations of tissues and organs are always associated with ethical challenges posed by bioethicists and societies to ensure the appropriate use of these tissues/organs. The purpose of this study was to understand the attitudes and awareness of parents/guardians regarding donation of excised foreskin to research and medical use. The study was based on a questionnaire and included 133 parents/guardians who visited Uhud Children's Hospital in Madinah, Saudi Arabia for newborn male circumcision. The results showed a high willingness (61.7%) to donate the extracted foreskin to research. The willingness to donate the extracted foreskin to research associated with undergraduate degree (P = 0.018), male sex (P = 0.011), high income (P = 0.029), and participation in previous research studies (P = 0.002). About 41.8% were convinced that written informed consent should be obtained before circumcision surgery, 38.1% (n = 51) were convinced that written informed consent should be taken after surgery, while the remaining 19.4% reported that the timing of written informed consent is unimportant. Finally, fear of excision of excess tissue (74.5%), lack of confidence in the research (68.6%), and potential for commercial use (64.7%) were the main barriers to unwillingness to donate the excised foreskin for research. In conclusion, a reasonable portion of Saudis agreed to donate their foreskin for research purposes. There is an urgent need to enhance awareness and attitudes towards tissue donation for research and therapeutic use.

Inhibition of Caries around Restoration by Ion-Releasing Restorative Materials: An In Vitro Optical Coherence Tomography and Micro-Computed Tomography Evaluation.

The objective of this study was firstly to assess the demineralization inhibitory effect of ion-releasing restorations in enamel adjacent to restoration using a biofilm caries model and secondly to compare the effect to that in a chemical caries model. Fifty-six bovine incisors were filled with either Surefil one (SuO), Cention N (CN) (both ion-releasing materials), Ketac-Molar (GIC) or Powerfill resin composite (RC). The restored teeth were then randomly divided into 2 groups according to the used caries model (biofilm or chemical caries model). The micro-computed tomography (MicroCt) and optical coherence tomography (OCT) outcome measures used to evaluate demineralization inhibition effects were lesion depth, LD and increase in OCT integrated reflectivity, ΔIR, at five different depths. It was observed that all outcome measures of CN were statistically the same as those of GIC and conversely with those of RC. This was also the case for SuO except for LD, which was statistically the same as RC. When comparing the two caries models, LD of the biofilm model was statistically deeper (p < 0.05) than the chemical model for all four materials. In conclusion, CN and SuO have similar demineralization inhibitory effects as GIC, and the biofilm caries model is more discriminatory in differentiating demineralization inhibitory effects of ion-releasing restorative material.

In vitro elemental and micromorphological analysis of the resin-dentin interface of bioactive and bulk-fill composites.

PURPOSE: To evaluate the bonding interface and the remineralization potential of a bioactive restorative material on demineralized dentin compared to a conventional bulk-fill resin composite restoration. METHODS: Twelve caries-free human molars were used in this study. Specimens were randomly divided into two groups according to the type of restorative material used (n=12); an injectable resin-modified glass-ionomer restorative [Activa BioActive-Restorative (ABR) ] and a bulk-fill composite [3M Filtek One Bulk Fill Restorative, (BFC) ]. Each restored specimen was sectioned in two semi-equal halves along the long axis of the teeth perpendicular to the resin dentin interface with a water-cooled diamond disk at low speed. The restoration-dentin interfaces were scanned under SEM to observe micromorphological analysis; then an elemental analysis of the interface was performed using an energy dispersive X-ray (EDX) spectroscopy. RESULTS: Quantitative data were described using median (minimum and maximum) after testing normality using the Shapiro-Wilk test. Mann-Whitney U test was used to compare the BFC and ABR. Higher mean values of Ca were identified and related to the ABR material, which provided more Ca ions than BFC. The comparison of Ca and P between materials showed a significant difference in the amount of Ca provided by ABR versus BFC. ABR restorations presented a thicker, and superior remineralization interface compared to the bulk-fill resin composite. CLINICAL SIGNIFICANCE: Activa BioActive Restorative restorations presented a thicker and superior remineralization interface compared to the bulk-fill resin composite.

Complexity and interplay of faced adversities and perceived health and well-being in highly vulnerable pregnant women-the Mothers of Rotterdam program.

BACKGROUND: Living in socially disadvantaged circumstances has a widespread impact on one's physical and mental health. That is why individuals living in this situation are often considered vulnerable. When pregnant, not only the woman's health is affected, but also that of her (unborn) child. It is well accepted that vulnerable populations experience worse (perinatal) health, however, little is known about the lived adversities and health of these vulnerable individuals. OBJECTIVES: With this article, insights into this group of highly vulnerable pregnant women are provided by describing the adversities these women face and their experienced well-being. METHODS: Highly vulnerable women were recruited when referred to tailored social care during pregnancy. Being highly vulnerable was defined as facing at least three different adversities divided over two or more life-domains. The heat map method was used to assess the interplay between adversities from the different life domains. Demographics and results from the baseline questionnaires on self-sufficiency and perceived health and well-being were presented. RESULTS: Nine hundred nineteen pregnant women were referred to social care (2016-2020). Overall, women had a median of six adversities, distributed over four life-domains. The heat map revealed a large variety in lived adversities, which originated from two parental clusters, one dominated by financial adversities and the other by a the combination of a broad range of adversities. The perceived health was moderate, and 25-34% experienced moderate to severe levels of depression, anxiety or stress. This did not differ between the two parental clusters. CONCLUSIONS: This study shows that highly vulnerable pregnant women deal with multiple adversities affecting not only their social and economic position but also their health and well-being.

Microshear Bond Strength of Bioactive Materials to Dentin and Resin Composite.

OBJECTIVES: The aim of this study was to comparatively evaluate microshear bond strength (µSBS) of bioactive ionic resin composite and resin-modified glass ionomer liner (RMGI) to dentin and resin composite. MATERIALS AND METHODS: The enamel of 11 posterior molar teeth was removed to expose dentin and then placed in acrylic blocks. Each specimen received three microcylindrical Tygon tubes filled with bioactive ionic resin composite (Activa Bioactive base/liner (PULPDENT: , MA, USA)), RMGI (Riva light cure SDI LTD, Bayswater, Australia), and resin composite (Filtek Z350xt, MN, USA). Composite discs (n = 11) were fabricated from nanofilled resin composite (Filtek Z350xt) and then fixed in acrylic blocks. Each specimen received two microcylindrical Tygon tubes filled with Activa Bioactive base/liner and Riva RMGI. All specimens were mounted individually to universal testing machine for µSBS test. Failure modes were analyzed using stereomicroscope and scanning electron microscope. RESULTS: Filtek Z350xt nanofilled resin composite showed the highest µSBS values. No statistical significant difference was found between Activa Bioactive and Riva RMGI (p > 0.05). CONCLUSION: Bioactive ionic resin composite liner exhibited similar bond strength as RMGI to dentin and resin composite.

Effect of different surface treatments on resin-matrix CAD/CAM ceramics bonding to dentin: in vitro study.

BACKGROUND: Evaluating the effect of different surface treatment methods on the micro-tensile bond strength (µTBS) of two different resin-matrix computer-aided design/computer-aided manufacturing (CAD/CAM) ceramics (RMCs). METHODS: A standardized inlay preparations were performed on 100 intact maxillary premolars. According to the type of the restorative material, the teeth were randomly divided into two equally sized groups (n = 50): (polymer-infiltrated ceramic (Vita Enamic) and resin-based composites (Lava Ultimate)). The inlays were fabricated using CAD/CAM technology. In each group, the specimens were randomly assigned to five subgroups (n = 10) according to the surface treatment method: group 1 used was the control group (no surface treatment); group 2, was treated with air abrasion with 50 µm Al2O3 (A) and universal adhesive (UA); group 3, was treated with air abrasion with 50 µm Al2O3 (A) and silane coupling agent (S); group 4, was treated with hydrofluoric acid (HF) and universal adhesive (UA) and group 5, was treated with Hydrofluoric acid (HF) + silane coupling agent (S). The inlays were then cemented to their respective preparations using dual-cure self-adhesive resin cement (RelyX U200, 3 M ESPE) according to the manufacturer's instructions. The µTBS test was conducted in all groups, and stereomicroscope and scanning electron microscope were used to inspect the failure mode. The data were statistically analyzed using a two-way analysis of variance (ANOVA) and Tukey's post-hoc multiple comparison tests at a significance level of p < 0.05. RESULTS: Surface treatments significantly increased the µTBS of the materials compared to the control group (p < 0.05). For CAD/CAM RBCs, the µTBS value highest in group 2 whereas, for PICN, the µTBS value was highest in group 3. Cohesive failure of CAD/CAM restorative material was the most predominant mode of failure in all treated groups, whereas adhesive failure at restoration-cement interface was the most predominant failure mode in the control group. CONCLUSION: Surface treatments increase the µTBS of resin-matrix CAD/CAM ceramics to tooth structure. Air abrasion followed by universal adhesive and hydrofluoric acid followed by silane application appears to be the best strategies for optimizing the bond strength of CAD/CAM RBCs and PICN respectively.

Secondary caries and marginal adaptation of ion-releasing versus resin composite restorations: a systematic review and meta-analysis of randomized clinical trials.

This systematic review was aimed to evaluate occurrence of secondary caries and marginal adaptation in ion-releasing materials versus resin composite. Electronic search of PubMed, Scopus, and Open Grey databases with no date or language restrictions until May 21st, 2021, was conducted. Randomized clinical trials that compared ion-releasing restorations versus resin composite were included. For quantitative analysis, a random-effects meta-analysis with risk difference as an effect measure and a 95% confidence interval was used. Quality of evidence was assessed using The Grading of Recommendations, Assessment, Development, and Evaluation criteria. The risk of bias was evaluated using the Cochran Collaboration Risk of Bias tool. The inclusion criteria were met by 22 studies, and 10 studies were included in the meta-analysis. Three follow-up periods (1 year, 18 months-2 years, and 3 years) were evaluated. The overall quality of evidence for secondary caries and marginal adaptation outcomes was low. The results of the meta-analysis showed no significant difference (p > 0.05) in both outcomes between ion-releasing materials and resin composite. The occurrence of secondary caries was not dependent on the nature of the restorative material. It is more likely a complex process that involves the same risk factors as primary carious lesions.

Long-term evaluation of early-enamel lesions treated with novel experimental tricalcium silicate paste: A 2-year randomized clinical trial.

OBJECTIVE: The aim of the current study is to evaluate the remineralization potential of experimental tricalcium silicate (TCS) paste in comparison with more popular remineralizing agents like silver diamine fluoride potassium iodide (SDF-KI) and casein phosphopeptide amorphous calcium phosphate (CPP-ACP) on early enamel lesions. MATERIALS AND METHODS: Forty-five patients in the age range of 15-50 years had early enamel lesions on the buccal surface of molar teeth. The patients were randomly divided into three treatment groups (SDF-KI, CPP-ACP, and TCS group) with 15 patients per group. Lesions were evaluated clinically by DIAGNOdent pen immediately and after 3,6,12, and 24 months of treatment. RESULTS: The study was completed with 45 patients and 92 teeth. Twice-daily application of CPP-ACP and TCS paste showed a significant remineralization effect on early enamel lesions after 24 months (p < 0.001). Also, annual application of SDF-KI showed a significant remineralization effect after 24 months (p < 0.001). There was a significant difference between (SDF-KI and CPP-ACP) and (SDF-KI and TCS) at the different follow-up periods 3,6,12, and 24 months (p < 0.001). Meanwhile, there was no significant difference between CPP-ACP and TCS at the mentioned follow-up periods (p > 0.05). CONCLUSION: TCS showed potential remineralization for early enamel lesions. CLINICAL RELEVANCE: Experimental TCS is a promising remineralizing agent for management of early enamel lesions.

Remineralization of early enamel lesions with a novel prepared tricalcium silicate paste.

To evaluate the remineralization potential of prepared tricalcium silicate (TCS) paste compared to silver diamine fluoride-potassium iodide (SDF-KI) and casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) on artificial enamel lesions. Thirty permanent sound molars were collected for the study. After cleaning, root cutting, and applying acid-resistant nail varnish, leaving a 4 × 4 mm buccal window, the teeth were subjected to demineralization process. The teeth were divided into three treatment groups (n = 10). In each group, the teeth were sectioned buccolingually to obtain two halves (30 self-control and 30 experimental halves). The self-control halves were subjected to cross-sectional microhardness (CSMH), energy-dispersive X-ray spectroscopy at 50, 100, and 150 µm from the external enamel surface, and micromorphological analysis at the superficial enamel surface. The experimental halves were subjected to the same tests after 30 days of remineralization. Three-way analysis of variance (ANOVA) outcomes showed no significant difference in CSMH after treatment among the three different groups at the different levels (p > 0.05). Meanwhile, three-way ANOVA outcomes showed a significant difference in calcium/ phosphate ratio after treatment among the three different groups at the different levels. (p < 0.05). The tricalcium silicate paste used in this study showed potential remineralization in subsurface enamel lesions.

Clinical performance of resin-matrix ceramic partial coverage restorations: a systematic review.

OBJECTIVE: To evaluate clinical performance of the new CAD/CAM resin-matrix ceramics and compare it with ceramic partial coverage restorations. MATERIALS AND METHODS: An electronic search of 3 databases (The National Library of Medicine (MEDLINE/PubMed), Scopus, and the Cochrane Central Register of Controlled Trials) was conducted. English clinical studies published between 2005 and September 2020 that evaluated the clinical performance of CAD/CAM resin-matrix ceramics inlays, onlays, or overlays were selected. The primary clinical question was applied according to PICOS strategy (Population, Intervention, Comparison, Outcome, Study design). The included studies were individually evaluated for risk of bias according to the modified Cochrane Collaboration tool criteria. RESULTS: A total of 7 studies were included according to the established inclusion and exclusion criteria. From the included studies, 6 were randomized clinical trials while one study was longitudinal observational study without control group. According to the results of the included studies, the success rate of CAD/CAM resin-based composite ranged from 85.7 to 100% whereas the success rate reported for ceramic partial coverage restorations ranged from 93.3 to 100%. Fractures and debondings are found to be the most common cause of restorations failure. CONCLUSION: CAD/CAM resin-based composite can be considered a reliable material for partial coverage restorations with clinical performance similar to glass ceramic restorations. However, this result needs to be confirmed in long-term evaluations. CLINICAL RELEVANCE: CAD/CAM resin-based composites provide a potential alternative to ceramic indirect restorations. However, clinicians must be aware of the lake of knowledge regarding long-term outcome.

In vitro study of antimicrobial activity of some plant seeds against bacterial strains causing food poisoning diseases / Estudo in vitro da atividade antimicrobiana de algumas sementes de plantas contra cepas bacterianas que causam doenças de intoxicação alimentar

In this research, some plant seeds powder was evaluated to find their potential effect to rule diseases of food poisoning. Antimicrobial effect of five plant seeds was examined contra Bacillus cereus, Staphylococcus aureus, Escherichia coli, Klebsiella. pneumonia and Candida albicans by using well diffusion method. Antimicrobial activity studies revealed high potential activity of plant seeds powder of Nigella sativa L., cucurbita pepo, Sesamum radiatum, Trigonella foenum-graecum, Linum usitatissimum with variable efficiency contra tested microbial strains with concentration of 100 mg/ml, except Sesamum radiatum scored no effect. The T. foenum and N. sativa seed powder showed the largest inhibition zone (24-20 mm) contra K. pneumonia, followed by S. aureus (20-18 mm) and C. albicans (15mm) respectively. The five plant seeds powder exhibited bacteriostatic and bactericidal effects with MIC's 20 and MBC 40 mg/ml against K. pneumonia, and MIC's 40 and MBC 60 mg/ml against S. aureus. The results of this study indicated that plants seeds powder have promising antimicrobial activities and their potential applications in food process. It could be utilized as a natural medicinal alternative instead of chemical substance.

Nesta pesquisa, o pó de sementes de plantas foi avaliado para encontrar seu efeito potencial no controle de doenças de intoxicação alimentar. O efeito antimicrobiano de cinco sementes de plantas foi examinado contra Bacillus cereus, Staphylococcus aureus, Escherichia coli, Klebsiella pneumonia e Candida albicans usando o método de difusão bem. Estudos de atividade antimicrobiana revelaram alto potencial de atividade de sementes de plantas em pó de Nigella sativa L., Cucurbita pepo, Sesamum radiatum, Trigonella foenum-graecum, Linum usitatissimum com eficiência variável contra cepas microbianas testadas com concentração de 100 mg / ml, exceto Sesamum radiatum com pontuação não efeito. O pó de sementes de T. foenum e N. sativa apresentou a maior zona de inibição (24-20 mm) contra K. pneumonia, seguido por S. aureus (20-18 mm) e C. albicans (15 mm), respectivamente. O pó de cinco sementes de plantas exibiu efeitos bacteriostáticos e bactericidas com MIC's 20 e MBC 40 mg / ml contra K. pneumonia, enquanto MIC's 40 e MBC 60 mg / ml contra S. aureus. Os resultados deste estudo indicaram que os pós de sementes de plantas apresentam promissoras atividades antimicrobianas e suas potenciais aplicações em processos alimentícios. Ele poderia ser utilizado como alternativa medicinal natural em vez de substância química.

In vitro study of antimicrobial activity of some plant seeds against bacterial strains causing food poisoning diseases / Estudo in vitro da atividade antimicrobiana de algumas sementes de plantas contra cepas bacterianas que causam doenças de intoxicação alimentar

In this research, some plant seeds powder was evaluated to find their potential effect to rule diseases of food poisoning. Antimicrobial effect of five plant seeds was examined contra Bacillus cereus, Staphylococcus aureus, Escherichia coli, Klebsiella. pneumonia and Candida albicans by using well diffusion method. Antimicrobial activity studies revealed high potential activity of plant seeds powder of Nigella sativa L., cucurbita pepo, Sesamum radiatum, Trigonella foenum-graecum, Linum usitatissimum with variable efficiency contra tested microbial strains with concentration of 100 mg/ml, except Sesamum radiatum scored no effect. The T. foenum and N. sativa seed powder showed the largest inhibition zone (24-20 mm) contra K. pneumonia, followed by S. aureus (20-18 mm) and C. albicans (15mm) respectively. The five plant seeds powder exhibited bacteriostatic and bactericidal effects with MIC's 20 and MBC 40 mg/ml against K. pneumonia, and MIC's 40 and MBC 60 mg/ml against S. aureus. The results of this study indicated that plants seeds powder have promising antimicrobial activities and their potential applications in food process. It could be utilized as a natural medicinal alternative instead of chemical substance.

Nesta pesquisa, o pó de sementes de plantas foi avaliado para encontrar seu efeito potencial no controle de doenças de intoxicação alimentar. O efeito antimicrobiano de cinco sementes de plantas foi examinado contra Bacillus cereus, Staphylococcus aureus, Escherichia coli, Klebsiella pneumonia e Candida albicans usando o método de difusão bem. Estudos de atividade antimicrobiana revelaram alto potencial de atividade de sementes de plantas em pó de Nigella sativa L., Cucurbita pepo, Sesamum radiatum, Trigonella foenum-graecum, Linum usitatissimum com eficiência variável contra cepas microbianas testadas com concentração de 100 mg / ml, exceto Sesamum radiatum com pontuação não efeito. O pó de sementes de T. foenum e N. sativa apresentou a maior zona de inibição (24-20 mm) contra K. pneumonia, seguido por S. aureus (20-18 mm) e C. albicans (15 mm), respectivamente. O pó de cinco sementes de plantas exibiu efeitos bacteriostáticos e bactericidas com MIC's 20 e MBC 40 mg / ml contra K. pneumonia, enquanto MIC's 40 e MBC 60 mg / ml contra S. aureus. Os resultados deste estudo indicaram que os pós de sementes de plantas apresentam promissoras atividades antimicrobianas e suas potenciais aplicações em processos alimentícios. Ele poderia ser utilizado como alternativa medicinal natural em vez de substância química.

In vitro study of antimicrobial activity of some plant seeds against bacterial strains causing food poisoning diseases

Abstract In this research, some plant seeds powder was evaluated to find their potential effect to rule diseases of food poisoning. Antimicrobial effect of five plant seeds was examined contra Bacillus cereus, Staphylococcus aureus, Escherichia coli, Klebsiella. pneumonia and Candida albicans by using well diffusion method. Antimicrobial activity studies revealed high potential activity of plant seeds powder of Nigella sativa L., cucurbita pepo, Sesamum radiatum, Trigonella foenum-graecum, Linum usitatissimum with variable efficiency contra tested microbial strains with concentration of 100 mg/ml, except Sesamum radiatum scored no effect. The T. foenum and N. sativa seed powder showed the largest inhibition zone (24-20 mm) contra K. pneumonia, followed by S. aureus (20-18 mm) and C. albicans (15mm) respectively. The five plant seeds powder exhibited bacteriostatic and bactericidal effects with MICs 20 and MBC 40 mg/ml against K. pneumonia, and MICs 40 and MBC 60 mg/ml against S. aureus. The results of this study indicated that plants seeds powder have promising antimicrobial activities and their potential applications in food process. It could be utilized as a natural medicinal alternative instead of chemical substance.

Resumo Nesta pesquisa, o pó de sementes de plantas foi avaliado para encontrar seu efeito potencial no controle de doenças de intoxicação alimentar. O efeito antimicrobiano de cinco sementes de plantas foi examinado contra Bacillus cereus, Staphylococcus aureus, Escherichia coli, Klebsiella pneumonia e Candida albicans usando o método de difusão bem. Estudos de atividade antimicrobiana revelaram alto potencial de atividade de sementes de plantas em pó de Nigella sativa L., Cucurbita pepo, Sesamum radiatum, Trigonella foenum-graecum, Linum usitatissimum com eficiência variável contra cepas microbianas testadas com concentração de 100 mg / ml, exceto Sesamum radiatum com pontuação não efeito. O pó de sementes de T. foenum e N. sativa apresentou a maior zona de inibição (24-20 mm) contra K. pneumonia, seguido por S. aureus (20-18 mm) e C. albicans (15 mm), respectivamente. O pó de cinco sementes de plantas exibiu efeitos bacteriostáticos e bactericidas com MICs 20 e MBC 40 mg / ml contra K. pneumonia, enquanto MICs 40 e MBC 60 mg / ml contra S. aureus. Os resultados deste estudo indicaram que os pós de sementes de plantas apresentam promissoras atividades antimicrobianas e suas potenciais aplicações em processos alimentícios. Ele poderia ser utilizado como alternativa medicinal natural em vez de substância química.

In vitro study of antimicrobial activity of some plant seeds against bacterial strains causing food poisoning diseases.

In this research, some plant seeds powder was evaluated to find their potential effect to rule diseases of food poisoning. Antimicrobial effect of five plant seeds was examined contra Bacillus cereus, Staphylococcus aureus, Escherichia coli, Klebsiella. pneumonia and Candida albicans by using well diffusion method. Antimicrobial activity studies revealed high potential activity of plant seeds powder of Nigella sativa L., cucurbita pepo, Sesamum radiatum, Trigonella foenum-graecum, Linum usitatissimum with variable efficiency contra tested microbial strains with concentration of 100 mg/ml, except Sesamum radiatum scored no effect. The T. foenum and N. sativa seed powder showed the largest inhibition zone (24-20 mm) contra K. pneumonia, followed by S. aureus (20-18 mm) and C. albicans (15mm) respectively. The five plant seeds powder exhibited bacteriostatic and bactericidal effects with MIC's 20 and MBC 40 mg/ml against K. pneumonia, and MIC's 40 and MBC 60 mg/ml against S. aureus. The results of this study indicated that plants seeds powder have promising antimicrobial activities and their potential applications in food process. It could be utilized as a natural medicinal alternative instead of chemical substance.

Morphology and molecular phylogeny of Heterobothrium lamothei (Monogenea: Diclidophoridae), a gill parasite infecting the tiger puffer fish Lagocephalus sceleratus (Tetraodontidae) / Morfologia e filogenia molecular de Heterobothrium lamothei (Monogenea: Diclidophoridae), um parasita das guelras que infecta o peixe tigre pufferLagocephalus sceleratus (Tetraodontidae)

Members of the family Diclidophoridae are potentially dangerous species for the puffer fish aquaculture worldwide. They are parasitic polyopisthocotyleans, with a posterior haptor equipped with clamps for attachment to the host's surface, allowing the worm to resist the flow of water to maintain its position on gills. The anterior body of the worm is deformable, allows the worm to feed on blood sucked from fish gills. The present study is the first description of a Heterobothrium species from the gills of the tiger puffer Lagocephalus sceleratus (Tetraodontidae) from the coasts of the Arabian Gulf at Jubail, Saudi Arabia morphologically by light microscopy as well as by molecular analysis of the parasite partial 28S rRNA through multiple sequence alignments and phylogeny by maximum likelihood analysis which is provided for the first time for the described species. Seventeen tiger puffer fish were captured alive from marine water off Saudi Arabia; gills were separated and further examined for parasitic infection. Nine fish were found infected with a monogenean parasite which was robust, equipped by two buccal organs at the tapered anterior end; the posterior haptor was rectangular with four symmetrically arranged clamps, with no isthmus. Marginal hooks absent. Ovary elongated, U-shaped, testes numerous, irregularly shaped and extended from the posterior part of the ovary to the anterior margin of the haptor. Copulatory organ muscular, as a spherical cup armed with 12 to 15 genital hooks. The molecular analysis of the parasite 28s rRNA and phylogeny revealed a percentage of identities between 87.47-89.09%, with Diclidophoridae species within the monophyletic clade of Mazocraeidea where a maximum percentage of 89.09% were obtained for the morphologically different sister taxon H. okamotoi. The results obtained from molecular analysis are consistent with the conclusions drawn from morphological classification where that the parasite recorded was morphologically similar to H. lamothei which was not characterized by molecular analysis before. The recovered sequences were deposited into the GeneBank under accession number MT322610.(AU)

Os membros da família Diclidophoridae são espécies potencialmente perigosas para a aquicultura de peixes puffer em todo o mundo. Eles são parasitas poliopisthocotyleans, com uma hélice posterior equipada com pinças para fixação na superfície do hospedeiro, permitindo que o verme resista ao fluxo de água para manter sua posição nas brânquias. O corpo anterior do verme é deformável, e permite que o verme se alimente de sangue sugado das guelras dos peixes. O presente estudo é a primeira descrição de uma espécie Heterobothrium das guelras do tigre Lagocephalus sceleratus (Tetraodontidae) das costas do Golfo Arábico em Jubail, Arábia Saudita, usando morfologia por microscopia leve, bem como análise molecular do rRNA parcial do parasita 28S através de alinhamentos de sequências múltiplas e filogenia por análise de máxima verossimilhança que é fornecida pela primeira vez para as espécies descritas. Dezessete peixes tigre puffer foram capturados vivos da água marinha da Arábia Saudita; as brânquias foram separadas e mais tarde examinadas para detecção de infecção parasitária. Nove peixes foram encontrados infectados por um parasita monogênio robusto, equipado por dois órgãos bucais na extremidade anterior afilada; o hortetor posterior era retangular com quatro pinças dispostas simetricamente, sem istmo. Ausência de ganchos marginais. Ovário alongado, em forma de U, testículos numerosos, de forma irregular e estendido desde a parte posterior do ovário até a margem anterior do hortelino. Órgão copulatório muscular, como um copo esférico armado com 12 a 15 ganchos genitais. A análise molecular do parasita 28s rRNA e filogenia revelou uma porcentagem de identidades entre 87,47-89,09%, com espécies Diclidophoridae dentro do clade monofilético de Mazocraeidea onde uma porcentagem máxima de 89,09% foi obtida para o táxon-irmão morfologicamente diferente H. okamotoi. Os resultados obtidos da análise molecular são consistentes com as conclusões tiradas da classificação morfológica onde o parasita registrado era morfologicamente semelhante ao H. lamothei que não era caracterizado pela análise molecular antes. As sequências recuperadas foram depositadas no GeneBank sob o número de acesso MT322610.(AU)

Influence of material type, thickness and storage on fracture resistance of CAD/CAM occlusal veneers.

OBJECTIVES: The present study aimed to evaluate the effect of restoration thickness, CAD/CAM material, and 6 months of artificial saliva storage on the fracture resistance of occlusal veneers. MATERIALS AND METHODS: A total of 84 intact maxillary molars were sectioned 4.0 mm occlusal to the cementoenamel junction to expose the dentine. The teeth were assigned into 3 main groups according to the type of restorative material (e.max CAD, Vita Enamic, and Lava Ultimate). In each group, the teeth were allocated into 2 subgroups (n = 14) according to restoration thickness (1.0 and 1.5 mm). The veneers were adhesively bonded using dual-cure self-adhesive luting agent. A total of 42 specimens comprising half the tested subgroups were stored in distilled water for 24-h before the test. The remaining half was stored in artificial saliva at 37 ± 1 °C in an incubator for 6 months. All specimens (n = 84) were subjected to 5000 thermal cycles between 5 and 55 °C ± 2 before the fracture resistance test. The maximum force at fracture was recorded in Newton. Failure mode was analyzed using a stereomicroscope. The results were analyzed using a parametric Three-way ANOVA test. RESULTS: The results of the Three-way ANOVA test revealed that material type and restoration thickness significantly affected fracture resistance values (p < 0.5), while 6 months of storage in artificial saliva had no significant effect on mean fracture resistance values (p˃0.5). The most common failure patterns in CAD/CAM resin composite and polymer-infiltrated ceramics were scores I and score II. For glass ceramic groups, score IV and III were more dominant. CONCLUSIONS: All the tested CAD/CAM restorations in both thicknesses exhibited fracture resistance values exceeding normal and parafunctional bite forces. Polymer-infiltrated ceramics and CAD/CAM resin composite veneers showed more favorable fracture patterns.